20200727 LIDAR Offline

Lidar computer was frozen when I arrived at 12:58, I restarted the computer at 12:59 and it began logging data at 1pm

20200720 WP offline

Wind Profile was offline, not pushing to TCEQ or NOAA. CompuTer looked good when arrived(not frozen) reset router twice, restarted computer. Started logging later that day.

20200710 WP Down

Frozen when arrived. Got WP back up. Moved temp files cleaned Lidar

20200623 WP and LiDAR

For Sergio
Found APC UPS beeping with FOS error. I recycled power on UPS and error was cleared. Both Lidar cl31 and wind profiler computers came back on.

20200615 Site Visit

Both computers on and working
Cleaned LIDAR.
A/C working (81)

20200520 Wind Profiler offline.

UPS error F02, computer was offline.
Restarting UPS caused computer to boot.
Faulty UPS is causing Loss of Data.

20200506 WP Computer off , Lidar had error

Computer was turned back on by TCEQ after it was turned off on the 4/29.  The power was turned on for the Wind Profiler Power Supply.
Tried to reached out Steve to see if anything was done to UPS.  Was not able to reached him.
Power Supply  was turned back on to see if it will stay on but it does not appear the UPS issue was fixed.
Lidar showed and error since 5/4/20.  CL-View was restarted and problem was resolved.

20200429 Windprofiler Shut down

UPS Bad, Error FO2, restarted UPS to get Battery error.
WP comp booted, I turned it and its power supplies, as well as the instrument off.
Lidar computer was running normaly.

20200427 Lidar and WP

WP computer was off.  UPS was biping and had an error code of F02
Restarted the UPS and everything came back online.  UPS showed a low battery charge.  Will have to go back and check if it happens again.
Lidar computer was stuck in a restart window.  Data was being collected.  Computer was online wen I left the site but it went offline around 7PM. 
There was a wasp nest in the opening of the Lidar window.  It was knocked off.

20200401 Lidar Offline

Lidar Computer frozen 03/23/2020
Computer restarted 13:42 CST 04/01/2020
Lidar had error "WARN", bird poop was on lidar lens, after instrument was opened and cleaned off the error went away.
The following picture shows a set of electrical connectors similar to the ones used on the underside of the windprofiler, and was found in the middle of the site.

20200122 Lidar Computer

When arrived liar computer was frozen, i restarted it at 11:05 and it started tracking data again at 11:07

20200122 Lidar Offline

La Porte Lidar went offline at 12:23CST 01/21/2020

20200113 LIDAR computer

LIDAR computer unresponsive this morning, came into trailer to the computer frozen, restarted it at 11:35 am and turned back on. Started logging data at 11:39 and Daniel was able to get in.

20200107 Site Visit

Cleaned LIDAR
moved files to archive
A/c working